- Product Name: 48 Cavity Preform Mould
-
Detailed Product Description: 48 Cavity Preform Mould
1) Off-center Adjustment System
Our off-center adjustment system has become one of the National patents in China. This system can make the error of perform.s wall thickness less than 0.05mm.This system do not affect life time of mould;
2) Self-lock System
Long bi-awls fixed orientation advanced techniques have been adopted on perform mould to reduce the perform eccentricity problem caused by our side reasons;
3) Cooling System
All the water Channels in the mould.s each inner part, which make the cycle time short enough. And all the cooling channels have been specially treated to prevent them from jam;
4) Heating System
Double heating System can ensure that the impact of heating is good and quality control is credible. The heating band unit makes nozzles be with invariable temperature. The Heater Unit is used to heat the hot runner plate with long using life and powerful heating capacity.
5) Hot Runner System
The perform mould adopt Pin-valve type Hot Runner System, such hot runner system can reduce mould.s each part.s wear ＆ tear and maintenance cost, and also save 10%-15% electric energy;
6) Hydraulic Ejecting System
The perform-doffing success ratio has achieved firm endurance and the whole perform ejecting process will become much quiete.
-
Product Images: 48 Cavity Preform Mould
