Characteristics
1.Adopt variable displacement piston pump,can save 20% power than usual.
2.Apply the double vertical pole and single horzontal beam to make enough rotation space,longer bottles,make the mold installation easy and simple.
Main Techical Paramters
| NO. | Item | Unit | Data |
| 1 | Dia.Of screw | mm | 40 |
| 2 | Max.The injection capacity | cm3 | 158 |
| 3 | Total power for hopper-heating | kw | 6.5 |
| 4 | Controller electric-heating | qty | 3 |
| 5 | Clamping force of injection mold | kn | 300 |
| 6 | Opening stroke | mm | 120 |
| 7 | Clamping force of blow mold | kn | 30 |
| 8 | Opening stroke of blow mold | mm | 120 |
| 9 | Idle cycle time | S | 6 |
| 10 | Max.Plane size of mold plate(l*w) | mm | 300*200 |
| 11 | Min.Mold thickness | mm | 180 |
| 12 | Main motor power | 2kw | 15 |
| 13 | Mold-heating power | 2kw | |
| 14 | Pressure of hyraulic system | Mpa | 14 |
| 15 | Max.Working pressure of compressed air | Mpa | 1.2 |
| 16 | Discharge rate of compressed air | m3/min | ≥0.8 |
| 17 | Consumption of cooling water | m3/h | 3 |
| 18 | Machine dimension(l*w*h) | mm | 3100*1100*2200 |
| 19 | Machine weight | T | 3.5 |
| 20 | Range of formability products | L | 0.003-0.6 |
| 21 | Height of formability products | mm |
≤190 |
| 22 | Dia of formability products | mm | ≤100 |
| 23 | Conveyer belt motor power | kw | 0.37 |
| 24 | Total power | kw | 25 |
Materials:suitable for majority kind of thermoplastic resins such as HDPE,LDPE,PP,PS,EVA and so on.
 Deutsch |
 Español |
 Français |
 Italiano |
 Português |
 日本の |
 한국어 |
 العربية |
 български |
 hrvatski |
 česky |
 Dansk |
 Nederlands |
 suomi |
 Ελληνικά |
 हिन्दी |
 norsk |
 Polski |
 Română |
 русский |
 Svenska |
Bookmark this page