Automatic Blow Molding Machine, Stretch Blow Molding Machine, Plastic Injection Molding Machine, Automative Mold, Plastic Blow Mold, Plastic Auxiliary Machine, PET Preform Mold, Cap Mold, Pipe Extrusion Machine, Blow Mold http://www.plastic-machinery-manufacturer.com chinavariety@gmail.com A specialized manufacturer of Automatic Blow Molding Machine, Stretch Blow Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molds, Plastic Blow Mold, Plastic Auxiliary Machine, Labeling Machine and Leak Detector. We are manufacturers, Supplier, Exporter, China OEM manufacturer for these Plastic Machinery. UTF-8 Fri, 26 Dec 2008 00:50:36 -0600 Fri, 26 Dec 2008 00:50:36 -0600 RedFox RSS Generator 7L 1 cavity stretch blow molding machine for hot filling http://www.plastic-machinery-manufacturer.com/7L-1-cavity-stretch-blow-molding-machine-for-hot-filling-125.html chinavariety@gmail.com 7L 1 cavity stretch blow molding machine for hot filling

FEATURES: 1. Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable. 2. Operation panel by touch screen, friendly interface and easy operation. 3. Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost. 4. 5-point double toggle clamping unit by optimized design for higher clamping force and speed.

APPLICATIONS: Mineral water, Medicine, Oil, Alcohol, Carbonated drink, Cosmetics, High temperature resistant bottles and any kinds of Wide-jar bottles.

SPECIFICATION:
Product Max. Container volume L 7
Max. inlet outer diameter Mm 120
Max. container diameter Mm 200
Max. container height Mm 335
Number of cavity   1
Theoretical output Bottle/hour 800  (*)
Electrical Installed power KW 63
Max. heating power KW 60
Compressed Air Operating Pressure MPa 0.7
Air consuming L/Min 1800
Blowing Pressure Mpa 2.5
Air consuming L/Min 1500-3000 (**)
Chilled water Pressure MPa 0.3 - 0.5
Temperature ºC 10-12
Flow rate L/Min 30
Machine Size ( LXWXH) M 3.2x2.2x2.0
Weight Kg 3000
Remarks:  (*) Depending on bottle size, shape and weight.
(**) Depending on bottle size and operating conditions.

]]> Fri, 26 Dec 2008 00:50:54 -0600 1.5L 2 cavity stretch blow molding machine for hot filling http://www.plastic-machinery-manufacturer.com/1-5L-2-cavity-stretch-blow-molding-machine-for-hot-filling-124.html chinavariety@gmail.com 1.5L 2 cavity stretch blow molding machine for hot filling

FEATURES: 1. Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable. 2. Operation panel by touch screen, friendly interface and easy operation. 3. Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost. 4. 5-point double toggle clamping unit by optimized design for higher clamping force and speed.

APPLICATIONS: Mineral water, Medicine, Oil, Alcohol, Carbonated drink, Cosmetics, High temperature resistant bottles and any kinds of Wide-jar bottles.

SPECIFICATION:
Product Max. Container volume L 1.5
Max. inlet outer diameter Mm 63
Max. container diameter Mm 95
Max. container height Mm 335
Number of cavity   2
Theoretical output Bottle/hour 1800  (*)
Electrical Installed power KW 63
Max. heating power KW 60
Compressed Air Operating Pressure MPa 0.7
Air consuming L/Min 1400
Blowing Pressure Mpa 3.5
Air consuming L/Min 2500-3500 (**)
Chilled water Pressure MPa 0.3 - 0.5
Temperature ºC 10-12
Flow rate L/Min 30
Machine Size ( LXWXH) M 3.45x2.23x2.03
Weight Kg 3500
Remarks:  (*) Depending on bottle size, shape and weight.
(**) Depending on bottle size and operating conditions.

]]> Fri, 26 Dec 2008 00:50:54 -0600 0.6L 6 cavity stretch blow molding machine for hot filling http://www.plastic-machinery-manufacturer.com/0-6L-6-cavity-stretch-blow-molding-machine-for-hot-filling-123.html chinavariety@gmail.com 0.6L 6 cavity stretch blow molding machine for hot filling

FEATURES: 1. Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable. 2. Operation panel by touch screen, friendly interface and easy operation. 3. Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost. 4. 5-point double toggle clamping unit by optimized design for higher clamping force and speed.

APPLICATIONS: Mineral water, Medicine, Oil, Alcohol, Carbonated drink, Cosmetics, High temperature resistant bottles and any kinds of Wide-jar bottles.

SPECIFICATION:
Product Max. Container volume L 0.6
Max. inlet outer diameter Mm 38
Max. container diameter Mm 65
Max. container height Mm 260
Number of cavity   6
Theoretical output Bottle/hour 6000  (*)
Electrical Installed power KW 67
Max. heating power KW 64
Compressed Air Operating Pressure MPa 0.7
Air consuming L/Min 2000
Blowing Pressure Mpa 3.5
Air consuming L/Min 3000-6000 (**)
Chilled water Pressure MPa 0.3 - 0.5
Temperature ºC 10-12
Flow rate L/Min 50
Machine Size ( LXWXH) M 4.2x2.4x2.2
Weight Kg 5500
Remarks:  (*) Depending on bottle size, shape and weight.
(**) Depending on bottle size and operating conditions.

]]> Fri, 26 Dec 2008 00:50:54 -0600 1.5L 4 cavity stretch blow molding machine for hot filling http://www.plastic-machinery-manufacturer.com/1-5L-4-cavity-stretch-blow-molding-machine-for-hot-filling-122.html chinavariety@gmail.com 1.5L 4 cavity stretch blow molding machine for hot filling

FEATURES: 1. Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable. 2. Operation panel by touch screen, friendly interface and easy operation. 3. Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost. 4. 5-point double toggle clamping unit by optimized design for higher clamping force and speed.

APPLICATIONS: Mineral water, Medicine, Oil, Alcohol, Carbonated drink, Cosmetics, High temperature resistant bottles and any kinds of Wide-jar bottles.

SPECIFICATION:
Product Max. Container volume L 1.5
Max. inlet outer diameter Mm 38
Max. container diameter Mm 95
Max. container height Mm 360
Number of cavity   4
Theoretical output Bottle/hour 4000  (*)
Electrical Installed power KW 83
Max. heating power KW 80
Compressed Air Operating Pressure MPa 0.7
Air consuming L/Min 2000
Blowing Pressure Mpa 3.5
Air consuming L/Min 4000-6000 (**)
Chilled water Pressure MPa 0.3 - 0.5
Temperature ºC 10-12
Flow rate L/Min 50
Machine Size ( LXWXH) M 4.12x2.4x2.2
Weight Kg 5500
Remarks:  (*) Depending on bottle size, shape and weight.
(**) Depending on bottle size and operating conditions.

]]> Fri, 26 Dec 2008 00:50:54 -0600 1.5L 4 cavity stretch blow molding machine for hot filling http://www.plastic-machinery-manufacturer.com/1-5L-4-cavity-stretch-blow-molding-machine-for-hot-filling-121.html chinavariety@gmail.com 1.5L 4 cavity stretch blow molding machine for hot filling

FEATURES: 1. Preform conveyor equipped with sliding wheels,precise orientation,stable and reliable. 2. Operation panel by touch screen, friendly interface and easy operation. 3. Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost. 4. 5-point double toggle clamping unit by optimized design for higher clamping force and speed.

APPLICATIONS:
Mineral water, Medicine, Oil, Alcohol, Carbonated drink, Cosmetics, High temperature resistant bottles and any kinds of Wide-jar bottles. 

SPECIFICATION:
Product Max. Container volume L 1.5
Max. inlet outer diameter Mm 38
Max. container diameter Mm 95
Max. container height Mm 360
Number of cavity   4
Theoretical output Bottle/hour 2000  (*)
Electrical Installed power KW 83
Max. heating power KW 80
Compressed Air Operating Pressure MPa 0.7
Air consuming L/Min 2000
Blowing Pressure Mpa 3.5
Air consuming L/Min 6000-8000 (**)
Chilled water Pressure MPa 0.3 - 0.5
Temperature ºC 10-12
Flow rate L/Min 30
Machine Size ( LXWXH) M 4.2*2.4*2.2
Weight Kg 5500
Remarks:  (*) Depending on bottle size, shape and weight.
(**) Depending on bottle size and operating conditions.

]]> Fri, 26 Dec 2008 00:50:54 -0600 Slow speed granulator series http://www.plastic-machinery-manufacturer.com/Slow-speed-granulator-series-120.html chinavariety@gmail.com Slow speed granulator series

Features:

1 As a plastic machine attached machine the slow speed granulator is a non-mesh slow speed plastic recyling unit specially designed for granulate the shorts,defective products(include various hard pl-astics) the plastic machine produced

2 The machine is charactcrized with stable and non-noise running, no powed polluting, granulating ineven, no-overheating in operation, as well as the merittsof safety, environment-friendly, power5r-saving,long time using life.

3 Use upper and lower knives for two times cutting, the knife frame is optimized base on former design. is more suitable for hard and thick plastic cutting. The knies made of Cv 12MV contented material.

4 Use slow speed motor and imported gear reducer from Taiwan

5 Equipped charging system with convenient operation. Can tetrieve in 60 second so the water and r-etrieved material will not be oxygenated and warmed up (damage or reduce the physical quality,tension,color,brightness)promote product reduce cost.

6 The parts and fittings are made of aluminum and stainless steel, the both low and high hopper are available with view windows and operated by mechanical hand.

Main Technical Data
Model
Power (Kw)
LxWxH Overall dimension (mm)
Crushing capacity (kg/h)
Size of knife (mm)
Diameter of granulating chamber (mm)
Speed (r/min)
Weight (kg)
XG-180
0.75
340*750*950
5-8
180
210*210
35
135
XG-265
1.5
380*880*1100
8-15
265
265*265
42
260
XG-340
2.2
600*1000*1200
8-16
340
340*340
42-46
350

]]> Fri, 26 Dec 2008 00:50:54 -0600 Medium speed granulator series http://www.plastic-machinery-manufacturer.com/Medium-speed-granulator-series-119.html chinavariety@gmail.com Medium speed granulator series

Features:

1 Motor overload protector.

2 The chain safety device can protect the safety of operator and machine.

3 The main power isolated switch.

4 Cutter is made of special steel,so it is sharp wearable and crushing granule with little dust.

5 Design for modularized strycture,for easy cleaning and main-tenance.

6 Four wheels for easy moving.

Main Technical Data
Model
Power (Kw)
Crushing chamber (mm)
Steady turning diamete (mm)
Speed (r/min)
Crushing capacity (kg/h)
XG-1820
1.5
180*200
180
120
30-50
XG-1830
2.2
180*290
150
50-70
XG-1840
4
180*400
150
70-90

 

Model
Fixed blades
Rotating blades
Mesh of a screen (mm)
Weight (Kg)
Blower(Kw)
XG-1820
2
21
6
145
0.55
XG-1830
30
165
0.55
XG-1840
42
185
0.55
]]> Fri, 26 Dec 2008 00:50:54 -0600 Standard Plastics Dryer http://www.plastic-machinery-manufacturer.com/Standard-Plastics-Dryer-118.html chinavariety@gmail.com Standard Plastics Dryer

Features:

1 Well-distributed Heated Wind The heat efficiency is high enough to shorten great amount of drying time.

2 Precise Temperature controls

The precise temperature controls ensure and keep a high accuracy of temperature .

3 Save Time and Manpower

As the hopper and bottom are designed separately and therefore it is very convenient to clean materials and quite simple and quick to renew materials as well.

4 The Trustworthy Design

Fine exterior,solid construction.Short material-melting time greatly helps to promote the spouting speed.

Main Technical Data
Type Diameter (mm) External size (mm) Capacity (kg) Heater Power (kw) Applicable injection (OZ.)
XHD-12kg 280 640*430*780 15 2.1  
XHD-25kg 350 760*500*900 25 2.7 3
XHD-50kg 430 840*540*1030 50 3.9 5-8
XHD-75kg 468 950*600*1140 75 4.8 6-9
XHD-100kg 550 1080*700*1250 100 7.8 10-30
XHD-150kg 630 1120*760*1300 150 8.88 15-30
XHD-200kg 700 1250*850*1480 200 10 30-60
XHD-300kg 750 1300*920*1740 300 15 >60
XHD-400kg 800 1400*1040*1760 400 20 >60
XHD-600kg 990 1600*1150*2150 600 27 >60
XHD-800kg 1090 1700*1330*2660 800 32 >60
XHD-1000kg 1090 1700*1330*2860 1000 32 >60

]]> Fri, 26 Dec 2008 00:50:54 -0600 Heat Preservating Hopper Dryer http://www.plastic-machinery-manufacturer.com/Heat-Preservating-Hopper-Dryer-117.html chinavariety@gmail.com Heat Preservating Hopper Dryer

Features:

1 Elegant appearance,smooth surface

2 Special"down-blowing" designed to distribute heat heat ever,avoiding drying plastic granule's two times moisture absorption,greating drying ablity.

3 Openable windown for view and inspection,excellent airtight and it is easy for cleaning materials

4 Equipment with micromputer controller which can reduce accident caused by men's wrong operation or mechanical error.

5 1-week auto start-stop timer function for saving energy

6 All models offer aluminium bottom, feet suction box, hot-air recycling system, and air filter for options

Main Technical Data
Type
Hopper capacity (L)
Heater power (kw)
Blower power (w)
External size (mm)
Specifceation (mm)
Height(external size) (mm)
Weight (kg)
XHD-40U
40
3
120
760*640*390
790*450*660
1295
25
XHD-80U
80
3.9
120
940*722*475
840*552*722
1465
50
XHD-120U
120
3.9
120
1210*722*475
840*552*722
1735
60
XHD-160U
160
6
180
1225*822*575
920*652*795
1825
90
XHD-230U
230
6
180
1505*822*575
920*652*795
2105
100
XHD-300U
300
12
250
1450*945*695
970*790*930
2085
130
XHD-450U
450
12
250
1850*945*696
970*790*930
2435
160
XHD-600U
600
18
550
1820*1170*915
1130*1000*1200
2470
200
XHD-750U
750
18
550
2100*1170*915
1320*1000*1200
2780
220
XHD-900U
900
18
550
2070*1340*1050
1320*1200*1200
2730
250
XHD-1200U
1200
18
550
2500*1340*1050
1320*1200*1200
3160
376

]]> Fri, 26 Dec 2008 00:50:54 -0600 XD Honeycle Cylinder Dehumidification Dryer http://www.plastic-machinery-manufacturer.com/XD-Honeycle-Cylinder-Dehumidification-Dryer-116.html chinavariety@gmail.com XD Honeycle Cylinder Dehumidification Dryer

Features:

1 The display screen shows re-producing temperature setting and actual temperature.

2 The dew point of dried wind hit -50ºC degree

3 main power switch with mechanical interlock function

4 The dehumidification system adopts double cooler structure,can guarantee very low return wind temperature and dew point

Humidity and water content rate check list
Dew point
Relative Humidify
Mositure Content
PPM
%
+20
100
23.072
2.307
+10
52.50
12.117
1.212
0
26.10
6.027
0.603
-10
11.20
2.574
0.257
-20
4.40
1.025
0.103
-30
1.60
378
0.038
-40
0.60
128
0.013
-50
0.20
39
0.004

 

Main Technical Data

Type Regen.Heater Power(kw) Dry Air Flow(m3/hr) Weight(kg) External size (mm) Pipe Size(inch)
XD-90 3.5 90 120 900*520*1700 2"
XD-120 3.5 120 140 900*620*1700 2"
XD-150 4 150 215 1300*700*1700 2.5"
XD-200 5.4 200 225 1300*700*1700 2.5"
XD-300 7.2 300 240 1300*700*1800 3"
XD-400 7.2 400 280 1300*700*1800 3"
XD-500 10 500 290 1500*1000*1900 4"
XD-700 10 700 300 1500*1000*1900 4"

Click here to see more product parameter list ]]> Fri, 26 Dec 2008 00:50:54 -0600